Loading

Key Features

The WR-A10 Wireless Remote Adapter is designed to work with the WR-R10 Wireless Remote Controller (transceiver), allowing it to be connected to select Nikon D-SLRs with a 10 pin connector, to wirelessly control the shutter release. The WR-T10/WR-R10 + WR-A10 Wireless Remote Adapter units use radio frequencies to communicate; by pairing together a WR-T10 and one or more WR-R10 units.
One WR-T10 unit can be paired with an unlimited number of cameras with a WR-R10 unit attached.
When the WR-R10 is used along with the WR-A10 WR Adapter to connect to select Nikon Digital Cameras with a 10-pin connector, one camera can be designated as “master” and control the shutter release of up to 64 WR-R10 transceiver units.
Range (line of sight) from the WR-T10 to WR-R10s is 66 feet (20 meters).
Photographers can use the WR-T10 to simultaneously release the shutter on multiple Nikon D-SLR cameras that have a WR-R10 unit attached and have been paired with the WR-T10.
Three radio frequency channels are available for use, to prevent interference when multiple pairings or multiple photographers are shooting in one location.
Useful for triggering the shutter remotely when using slower shutter speeds, to prevent camera movement.
Range (line of sight) from WR-R10 (used with the WR-A10 WR adapter on select D-SLRs, and acting as a master unit) to WR-R10s is 164 feet (50 meters).
5 Questions | 7 Answers

Product Q&A

Ask your questions. Share your answers.

 
 
Clear Search
 
 
5 Questions | 7 Answers
All Questions
1 of 1
Sort by:
Has staff answer
Has expert answer
WR-A10 Wireless Remote Adapter
 
2 Answers

Do I really need this if I am going to buy the WR-T10 Wireless Remote Controller (transmitter) and the WR-T10 Wireless Remote Controller (transceiver)

Jun 15, 2013 by
Has staff answer
Has expert answer
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
I was wondering if I need this even though I am going to buy the transmitter and transceiver. One of the main reasons I am asking is because if I do indeed need this "adapter" to work with the other two products. I simply can't because it says my camera isn't compatible.

Thank you!
11 months ago
by
Anonymous
2 Answers

Answers

0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Answer: 
The WR-T10 transmitter communicates with the WR-R10 receiver. The WR-R10 plugs directly into cameras that have an accessory port. If your camera has a 10-pin connector instead of an accessory port then you will need the WR-A10 adapter. The WR-R10 fits into the WR-A10 which then plugs into the 10-pin port. If you have an older model that camera doesn't have an accessory port or a 10-pin connector, like the D40 or the D3000, then the WR-10 system of remotes is not compatible with your camera.
Jun 17, 2013 by
by
NikonCatherine
New York

0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Answer: 
The adapter is only required on cameras with 10 pin connectors
Jun 16, 2013 by
by
JoeR
1 person is following this questionFollow This Question
WR-A10 Wireless Remote Adapter
 
2 Answers

Will either the WU-1A or the WU-1B fit into the WR-A10 to give me WiFi connectivity with the D800?

Nov 19, 2013 by
by
MikeF
Denver, CO, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
6 months ago
by
MikeF
Denver, CO, USA
Location : 
Denver, CO, USA
Age: 55-65
Favorite Subject: Nature
Nikon Family: 21+ years
Role: Professional photographer
2 Answers

Answers

0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Answer: 
So instead of a $59.95 accessory like the WU-1A, I have to buy a $1,000 accessory? Doesn't seem right to have to buy a $1,000 device to fit a $3,000 camera when I can buy a $500 camera that already has WiFi and GPS built in. I guess I will start checking out third party solutions. To Bad.
Nov 20, 2013 by
by
MikeF
Denver, CO, USA
Location : 
Denver, CO, USA
Age: 55-65
Nikon Family: 21+ years
Role: Professional photographer

0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Answer: 
No, neither wireless mobile adapter is compatible with the d800. The only available wireless is the WT-4 / camera control pro.
Nov 19, 2013 by
by
JoeR
1 person is following this questionFollow This Question
Has staff answer
Has expert answer
WR-A10 Wireless Remote Adapter
 
1 answer

Is the WR-A10 really compatible with only the four cameras listed under the "Compatible WIth" tab? I have a D3s and a D200, so I can't use the WR-10?

Feb 9, 2013 by
by
Mr. Baggins
Elgin, IL
Has staff answer
Has expert answer
-1point
0out of 1found this question helpful.
Was this helpful?helpful0unhelpful1
1 year, 4 months ago
by
Mr. Baggins
Elgin, IL
Location : 
Elgin, IL
Age: 55-65
Favorite Subject: Portrait
Nikon Family: 11-20 years
Experience: Less than a month
Role: Semi-professional photographer
1 answer

Answers

+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
Answer: 
The WR-R10/WR-T10/WR-A10 Wireless Remote Adapter Set is compatible with both the D3s and the D200. All 3 pieces of the set will be required for these cameras since the WR-A10 adapter allows the WR-R10 transceiver to be connected the 10-pin connector. Please note that the D200 will temporarily display GPS in the LCD if the exposure meters are activated after the unit is attached.
Feb 11, 2013 by
by
NikonCatherine
New York
1 person is following this questionFollow This Question
Has staff answer
WR-A10 Wireless Remote Adapter
 
1 answer

Will the WR-A10 Wireless Remote Adapter work with a Nikon N-90s film camera?

Mar 20, 2013 by
by
PhotoJoe
Asheville, NC, USA
Has staff answer
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
The N90s has a 10 pin connector so I'm curious if it will work. I'm thinking about purchasing the set as I have a D300.
1 year, 2 months ago
by
PhotoJoe
Asheville, NC, USA
Location : 
Asheville, NC, USA
Age: 45-54
Favorite Subject: Nature
Nikon Family: 21+ years
Experience: Less than a month
Role: Serious passion, hobbyist
1 answer

Answers

0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Answer: 
Yes.
Apr 24, 2013 by
by
NikonStaff2
1 person is following this questionFollow This Question
WR-A10 Wireless Remote Adapter
 
1 answer

Wirelessly transfer from images from gear to Ipad/MacBook . . .

Dec 7, 2013 by
by
NikonBob
Salt Lake City, Utah
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
I have N90s, D70, D200 and a D300. The D200 came with upgrade for wireless shutter release (after I bought trigger piece) - I saw on a 3rd party website that a similar product (wr 10a ?) allowed for transfer to an iPhone or Ipad, does this set up work for the D300 similarly?

I shoot all kinds of competitions and would gain a marketing advantage if I could go straight to a device with a large monitor for those quick impulse buyers.
6 months ago
by
NikonBob
Salt Lake City, Utah
Location : 
Salt Lake City, Utah
Age: 45-54
Favorite Subject: Nature
Nikon Family: 21+ years
Experience: More than a year
Role: Semi-professional photographer
1 answer

Answers

0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Answer: 
The WR-A10 is only a wireless remote, it does not allow for the transfer of images
Dec 8, 2013 by
by
KeithD
1 person is following this questionFollow This Question
1 of 1
1 of 1