Loading
;

Key Features

The WR-T10/WR-R10 Wireless Remote Controller units use radio frequencies to communicate; by pairing together a WR-T10 and one or more WR-R10 units. The WR-A10 WR Adapter is designed to work with the WR-R10 Wireless Remote Controller (transceiver), allowing it to be connected to select Nikon D-SLRs with a 10-pin connector, to wirelessly control the shutter release. D-SLRs without a 10-pin connector do not need the adapter.
One WR-T10 unit can be paired with an unlimited number of cameras with a WR-R10 unit attached.
When the WR-R10 is used along with the WR-A10 WR Adapter to connect to select Nikon Digital Cameras with a 10-pin connector, one camera can be designated as “master” and control the shutter release of up to 64 WR-R10 transceiver units.
Range (line of sight) from the WR-T10 to WR-R10s is 66 feet (20 meters).
Photographers can use the WR-T10 to simultaneously release the shutter on multiple Nikon D-SLR cameras that have a WR-R10 unit attached and have been paired with the WR-T10.
Three radio frequency channels are available for use, to prevent interference when multiple pairings or photographers are shooting in one location.
Useful for triggering the shutter remotely when using slower shutter speeds, to prevent camera movement.
Range (line of sight) from WR-R10 (used with the WR-A10 WR adapter on select D-SLRs, and acting as a master unit) to WR-R10s is 164 feet (50 meters).
WR-R10/WR-T10/WR-A10 Wireless Remote Adapter Set 3 5 1 1
Easy to use, does what it says it does. I got my WR-x10 kit along with my brand new D800E about 2 weeks ago but hadn't had time to try it out. My old faithful ML-L3 doesn't work with the D800E but the x10 has several advantages over it: I don't have to stay "in sight" of the infrared, the x10 controls more than one camera and is flexible enough to control each group through a different channel. Also, for the D800E, it mimics the Fn button which was very helpful. The manual explains in very simple terms how to use the kit but it took me a while to figure out where to connect the WR-A10; I also found it cumbersome to have to screw it into the right place in the camera. A top notch camera like the D800/D800E should have a direct connection. Anyway, once I figured this out, the x10 set was very easy to pair and its operation does exactly what the manual says it does. My final opinion: too expensive to be so basic. But it's small, light and works fine so for field trips it's OK. Better than the ML-L3 that caught me standing in the pictures of some landscape shots... May 30, 2013
1-1 of 1
14 Questions | 14 Answers

Product Q&A

Ask your questions. Share your answers.

 
 
Clear Search
 
 
14 Questions | 14 Answers
All Questions
Page:2
<<prev
Sort by:
WR-R10/WR-T10/WR-A10 Wireless Remote Adapter Set
 
1 answer

can it work with nikon Df

May 29, 2014 by
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
2 weeks, 1 day ago
by
john
China
Location : 
China
Age: Over 65
Favorite Subject: Landscape
Nikon Family: 6-10 years
Experience: More than 10 years
Role: Serious passion, hobbyist
1 answer

Answers

0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Answer: 
You don't need the WR-A10,
Here is the remote compatibility chart:
http://www.nikonusa.com/en_US/IMG/Images/Learn-Explore/Camera-Technology/D-SLR/2013/Shooting-with-Remotes/Media/Nikon-remotes-compatibility-chart.pdf
May 29, 2014 by
by
JoeR
1 person is following this questionFollow This Question
Has staff answer
Has expert answer
WR-R10/WR-T10/WR-A10 Wireless Remote Adapter Set
 
1 answer

how do you use this thing with bulb mode?

Nov 8, 2013 by
by
Lemming
Las Vegas, NV, USA
Has staff answer
Has expert answer
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
is there any way to keep the shutter open, without holding the button for minutes? The infrared ML-L3 remote used to open shutter with one press and close with another.
 
Products related to my question
 
7 months ago
by
Lemming
Las Vegas, NV, USA
Location : 
Las Vegas, NV, USA
Age: 25-34
Nikon Family: 2-5 years
Experience: Less than a month
Role: Semi-professional photographer
1 answer

Answers

0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Answer: 
When using the WR-10 in bulb mode the shutter button must be held down to keep the shutter open.
Nov 22, 2013 by
by
Nikon_Chelsea
New York
1 person is following this questionFollow This Question
Has staff answer
Has expert answer
WR-R10/WR-T10/WR-A10 Wireless Remote Adapter Set
 
1 answer

Which features are supported?

Nov 21, 2013 by
by
Wm Gardner Photography
Central Wisconsin, USA
Has staff answer
Has expert answer
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
Interested in buying this product and move away from the MC-30/38 releases. However, we are lacking a bit of detail here......
-Is BULB supported?
-What batteries are needed (I assume the x-ceiver pulls power from the camera body)
-How far does the adapter protrude from the body...... will I have trouble using an L-bracket?
-There is no display on the x-mitter, what does the Fn button control?

Thanks in advance.
6 months ago
by
Wm Gardner Photography
Central Wisconsin, USA
Location : 
Central Wisconsin, USA
Age: 35-44
Nikon Family: 21+ years
Role: Professional photographer
1 answer

Answers

+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
Answer: 
The WR-10 is capable of shooting in bulb mode. It is necessary to hold the remote release button on the WR-T10 when shooting in bulb mode. The WR-T10 takes a CR2032 3 V lithium battery. The fn button will control the fuction that is assigned on the camera. Please note that depending on your camera, it may not need the WR-A10 if it has a ten pin port on the side of the camera.
Nov 22, 2013 by
by
Nikon_Chelsea
New York
1 person is following this questionFollow This Question
Has staff answer
Has expert answer
WR-R10/WR-T10/WR-A10 Wireless Remote Adapter Set
 
1 answer

Is the set come with strap?

Dec 12, 2013 by
Has staff answer
Has expert answer
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
I got this set just now and I couldn't find the strap that mentioned in the instruction.
 
Products related to my question
 
6 months ago
by
Jue
Eugene, OR, USA
Location : 
Eugene, OR, USA
Age: 18-24
Favorite Subject: Travel
Nikon Family: 2-5 years
Experience: Less than a month
Role: Serious passion, hobbyist
1 answer

Answers

0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Answer: 
There is no strap included with the WR-R10/WR-T10/WR-A10 Wireless Remote Adapter Set.
Dec 16, 2013 by
by
Nikon_Chelsea
New York
1 person is following this questionFollow This Question
Page:2
<<prev
Page:2
<<prev